GEN/MD1 VA3
Installation tutorials
Remove
Remove
RF. MOD, CN4, C86, L6, FB5, FB14, EM31, EM32, EM33, EM34, EM35, EM36, EM37, EM38, OSC1
Solder at 90 degrees
Solder at 90 degrees
C24, C38, C63, C71, L3, L5
Flexible pcb
Flexible pcb
Unsolder pin 62 of the CPU and solder a resistor in series.
Unsolder pin 62 of the CPU and solder a resistor in series.
Cut
Cut
JP1 or JP2 and JP3 or JP4
Thermal tape
Thermal tape
Apply thermal tape to the back between the main board and Board-A.
Wires from the cartridge slot
Wires from the cartridge slot
Wire from VRAM
Wire from VRAM
Wire from reset btn
Wire from reset btn
Wires from JP2 and JP4
Wires from JP2 and JP4
Install Board-A
Install Board-A
PWR wires of Board-B (GND and 3V3) and FFC cable
PWR wires of Board-B (GND and 3V3) and FFC cable
Board-A is installed.
DC-DC Power converter
DC-DC Power converter
Connect FFC cable to Board-B
Connect FFC cable to Board-B
Connect PWR wires to Board-B
Connect PWR wires to Board-B
Connect coaxial wire to Board-B
Connect coaxial wire to Board-B
Metal and inductor
Metal and inductor
